12U/104HP Portable Eurorack Modular Case “Performer Series”

12U/104HP Portable Eurorack Modular Case “Performer Series”


12/104HP Portable Eurorack Modular Case “Performer Series”

Add To Cart

Welcome to the new MDLRCASE portable Eurorack case; the 12U 104HP Performer Series.

We’ve been listening to modular artists and believe this new MDLRCASE offers the best solution for those in need of a flexible portable case. Using a detachable middle “ring” allows you to patch your rig and leave it patched before heading to your next gig, it also functions as a rock solid stand giving you the perfect angle to access your modules during your performances. By using this design where the modules are not sitting deep in the case, you have full and easy access to all your beloved modules.

Starting with reliability in mind we build our cases with Penn Elcom components for maximum durability and apply a two-component coating solution that adds an extra layer of protection to your serious investment. We want to make sure your gear is working great in the studio or at a live event.

MDLRCASE offers our customers two power options; the more “juicy” Doepfer PSU-3 for the power hungry or the Meanwell RT65B for the budget aware who may not have huge power requirements. The 4 busboards in this case offer the ability to connect 78 modules so you’re always sure to have all your popular creative tools on hand.

Place your order today for the new 12U 104HP Performer and get out there to show the world what these wires and knobs are all about.


Technical specifications:

MDLRCASE  12U/104HP portable eurorack case

Detachable middle ring which functions as a rock solid stand as well
Rails are flat with the sides
Both sides can be used apart as 2 separate 6U
Dimensions approximately: L= 56cm W=33 H=21cm
Total weight including rails and powersupllies 9.8 kg  (this is for the 12U)
Space from top rail to bottom 7,5cm
Space above PSU 4cm (you can place any skiffy module here)
Can be patched while carried
Handmade case, fully nailed and glued construction.
12mm birchwood with a special 2 layer protection coating
2x Doepfer PSU-3 or 2x Meanwell RT-65B power supply (choose in order proces).
Switching power for worldwide use
12 rails with M3 threaded strips
4 MDLRCASE busboards (19 headers each)
Completely wired and assembled
Luxe carrying handle
Rubber feet
2 powerswitches

Powersupply (2x Doepfer PSU-3 or 2x Meanwell RT-65B):

Doepfer PSU-3
The PSU3 is a strong power supply for Eurorack modular systems. It is universal i.e. it works with a wide range of mains voltages, from 100V to 240V. Up to four bus boards can be connected to the PSU3.

Since early 2016 it is used in most enclosures and complete systems from Doepfer. Compared to it’s precursor with a toroidal transformer it supplies you with more current at +12V and it generates four Ampere at +5V!

12V / 2000 mA
-12V / 1200 mA
+5V / 4000 mA

Meanwell RT65B power supply:

AC-DC Triple output enclosed power supply
The closed design and the short circuit and overvoltage protection are the properties that make the industrial MeanWell switching power supplies stand out.

• Closed design (case), screw connections
• Universal input
• Overload protection via current limit, auto recovery
• Protected against short circuit, overload, excess voltage
• Long-life 105°C electrolytic capacitors

Technical data:
Output voltage: CH1: 5 V/CH2: 12 V/CH3: -12 V
Output current: CH1: 5 A/CH2: 2.8 A/CH3: 0.5 A
Output: 64.6 W
Ripple: CH1: 80 mVpp/CH2: 120 mVpp/CH3: 80 mVpp
Input voltage: 88 ~ 264 V AC/125 ~ 373 V DC
Efficiency: 77%
Max. inrush current: COLD START 40 A/230 V AC
Operating temperature: -40 – +85°C
Size: 129 x 98 x 38 mm
Weight: 0.44 kg

MDLRCASE busboard:

2x screw terminals for power supply/second busboard connection
20x standard eurorack power connectors with safety notches to protect from modules reversed connections
3 power rails 12V, -12V, 5V
voltage indicator LED on every power line
decoupling capacitors to remove residual PSU ripple at every power line
switchable 5V linear voltage regulator for power supplies that don’t support 5V output