FabFilter Mastering Bundle
FabFilter Mastering Bundle
The Mastering Bundle contains FabFilter's essential plug-ins for mastering: our professional limiter, EQ, multiband dynamics and compressor plug-ins.
Powerful and Intuitive
Multiband compression and expansion are powerful tools, but notoriously difficult to set up and control. Enter FabFilter Pro-MB: making multiband dynamics processing intuitive yet powerful at the same time.
A New Approach
Instead of conventionally splitting the entire spectrum with crossovers, Pro-MB enables you to directly create a new band at the frequency range you want to work on. Think bands, not crossovers!
The interactive multiband display clearly shows that the rest of the spectrum stays untouched. And if desired, you can easily snap bands together to recreate a traditional crossover system.
Lifesaver and Timesaver
FabFilter Pro-MB introduces a unique Dynamic Phase processing mode. It has virtually the same frequency response as traditional multiband processing, but doesn't introduce latency or pre-ringing, and only introduces minor phase changes when the gain actually changes. Of course, we have also included an excellent Linear Phase mode and a traditional Minimum Phase mode.
The powerful combination of high quality processing, optimized workflow using the interactive multiband display and all the expert features you need, makes Pro-MB both a lifesaver and timesaver!
Click the link for further info on FabFilter Pro-MB
Loud and clear
A true peak limiter is an essential tool for every mastering or mixing engineer. Are you looking for a professional, feature-packed limiter that is loud and transparent at the same time, equipped with extensive loudness metering? Then FabFilter Pro-L 2 is your weapon of choice!
FabFilter Pro-L 2 features precise true peak level meters and extensive loudness metering with support for the EBU R128, ITU-R BS.1770-4 and ATSC A/85 standards. Combined with its unique real-time level display, you have all the information you need to achieve the best possible results.
Click the link for further info on FabFilter Pro-L 2.
Unrivalled Sound and Workflow
An equalizer is probably the tool you use most while mixing and mastering, so you need the best of the best! With FabFilter Pro-Q 3, you get the highest possible sound quality and a gorgeous, innovative interface with unrivalled ease of use.
Mixing and Mastering Features
Pro-Q 2 offers everything that a demanding engineer could wish for: top quality linear phase operation in addition to the zero latency and unique Natural Phase modes, Mid/Side processing, variable stereo placement of EQ bands, an intelligent solo feature, optional Auto Gain and a built-in, fully customizable spectrum analyzer.
Highest possible sound quality
Up to 24 EQ bands
NEW - Optional Dynamic EQ mode for all bands (Bell and Shelf shapes), using any slope setting and with perfect analog matching
IMPROVED - Gorgeous Retina interface with large interactive EQ display, multi-band selection and editing for maximum ease of use and efficiency
NEW - Ultra-steep 'Brickwall' slope setting for LP and HP filters
NEW - Full surround support (up to Dolby Atmos 7.1.2) with intelligent speaker selection
NEW - External spectrum visualization from any other Pro-Q 3 instance, including collision detection
NEW - Per-band mid/side or left/right processing, so you can EQ the mid, side, left or right signals separately
Operates in zero latency mode, linear phase mode with adjustable latency or the unique Natural Phase mode
NEW - Flat Tilt filter shape, a flat tilting correction curve over the whole audible frequency spectrum
IMPROVED - Spectrum Grab: just grab and adjust a peak in the real-time spectrum analyzer right away!
Different interface sizes and additional Full Screen mode
IMPROVED - Filter shapes: Bell, Notch, High/Low Shelf, High/Low Cut, Band Pass, Tilt Shelf, Flat Tilt
Universal filter slope support for all filter types, up to 96 dB/oct
IMPROVED - EQ Match feature to automatically match the spectrum of another Pro-Q 3 instance or an external signal
IMPROVED - Built-in spectrum analyzer with Pre-EQ, Post-EQ and external spectrum visualization, adjustable range, speed, resolution, tilt, freeze and collision detection
Auto Gain and Gain Scale
Optional piano roll display to quantize EQ frequencies to musical notes
Different display ranges: 3 dB and 6 dB ranges for mastering, 12 dB and 30 dB for mixing
Intelligent solo mode makes it easy to find problem frequencies and hear the effect of a band
Phase Invert option to change polarity
Large output level meter with peak level readout
Extreme CPU optimization: Pro-Q 3 uses very little CPU and memory, so you can use hundreds of instances in a session
GPU-powered graphics acceleration
Double-click text entry of parameter values
IMPROVED - Supports stereo, mono and surround channel layouts (up to Dolby Atmos 7.1.2)
Supports common Pro Tools hardware control surfaces
IMPROVED - MIDI Learn with option to control the currently active band
Undo/redo and A/B comparison
Smart Parameter Interpolation
Sample-accurate automation of all parameters
Extensive help file with interactive help hints
Available in VST, VST3, Audio Units, AAX Native and AudioSuite formats (all both 64-bit and 32-bit)
Learn more about FabFilter Pro-Q 3.
Incredible Sound and Character
FabFilter Pro-C 2 is a high-quality compressor plug-in for the most demanding engineers. Whether you need subtle mastering compression, an upfront lead vocal, that magic drum glue or deep EDM pumping: Pro-C 2 gets the job done with style!
Everything You Need
Pro-C 2 offers eight different, program-dependent compression styles with beautiful sound and character. But there's more! Apart from the classic compressor controls, you also get smooth lookahead, up to 4x oversampling, intelligent auto-gain and auto-release, a variable knee, hold, range, external side-chain triggering, variable stereo linking and mid/side processing, all packed in a beautiful Retina user interface.
Click the link for further info on FabFilter Pro-C 2.
64-bit: Windows 10, 8, 7 or Vista
32-bit: Windows 10, 8, 7, Vista or XP
VST 2/3 host or Pro Tools
Mac OS X:
64-bit: OS X 10.6 or higher
32-bit: OS X 10.5 or higher
AU or VST 2/3 host or Pro Tools
All FabFilter plug-ins are available in VST, VST3, Audio Units, AAX Native and AudioSuite formats (all both 64-bit and 32-bit), as well as RTAS (32-bit only)