Filtare SEIII

Filtare SEIII

250.00

The Filtare SEIII is a multimode, state-variable voltage-controlled filter that gives you low-pass, band-pass and high-pass outputs which are all simultaneously available.

Quantity:
Add To Cart

The Filtare SEIII is a multimode, state-variable voltage-controlled filter that gives you low-pass, band-pass and high-pass outputs which are all simultaneously available. It also includes a notch output which allows you to change the balance between low-pass and high-pass. The SEIII uses discrete components but is based on SSM2040 architechture, giving you a very musical sounding filter. There are CV inputs for frequency, resonance and notch balance. The 1 V/O CV input for frequency can be used to have the VCF follow what you’re playing on the keyboard or just crank up the resonance and use it to play sine-waves.

Inputs:

  • CV (for frequency control): 1V/O fixed

  • CV (for frequency control): Adjustable

  • CV (for resonance)

  • CV (for notch balance)

  • Audio

Outputs:

  • Low-Pass

  • Band-Pass

  • High-Pass

  • Notch

Controls:

  • Frequency

  • Resonance

  • CV Level (frequency)

  • Notch Balance

  • Volts / Octave Adjust for 1 V/O input (trim pot on back)

Includes:

  • Filtare SEIII Module

  • Doepfer-style Power Cable

  • (4) M3 x 6mm Rack Screws w/ Nylon Washers

Specification:

  • Modes: LP, BP, HP

  • All modes are 4-Pole (24dB/Octave)

  • Notch: Change balance between LP and HP (total drop with balance at center is 3.4dB)

  • Power supply: +/- 12 VDC (reverse-polarity protected!)

  • Power draw: 80mA (+) / 80mA (-)

  • Width: 8HP

  • Depth: 1.38in / 35mm